Wi-Fi

Save your Wi-Fi network in Titan and pick it as Fleet WiFi. Titan puts it on each iPhone when the phone is set up, so you never type the password on a phone.

1. Save a networkCopy Anchor Link

Your assistant can save the network for you: send it the network name and password. To do it yourself:

1. In the left menu, press WiFi.

   

2. Press Add WiFi.

   

3. Name: any name you will recognise, for example Office WiFi.

4. SSID: the network's exact name, as your phone shows it in its Wi-Fi list. Capitals count.

5. Security: pick what your router uses. Usually WPA2 Personal.

6. Password: the Wi-Fi password. Skip it for Open (No password).

7. Leave Hidden network off, unless your network is hidden. Leave Auto join on.

   

8. Press Save.

Done when: the network is in the list.

2. Pick the Fleet WiFiCopy Anchor Link

Saving a network is not enough: pick it for the fleet.

1. On the Fleet WiFi card, press Select Wi-Fi (or Change).

   

2. Choose your network.

3. Press Confirm.

   

Done when: the card says Selected: with your network's name and SSID.

The iPhone gets this network during supervision. A phone that was set up before you picked it gets it when you press Install profiles in its Provisioning Readiness.

3. Edit or delete a networkCopy Anchor Link

1. On the network's row, open the actions menu.

2. Press Edit to change it, then Save. Or press Delete, then Delete again.

   

Changed the password on your router? Edit the network here, then press Install profiles on each iPhone.

Deleted the Fleet WiFi network? Pick another one (section 2).

If something is differentCopy Anchor Link

Next: Supervise an iPhone.